• HOME
  • HEALTH & SAFETY
  • EQUIPMENT
    • QUOTE
  • LICENSES
  • CAREERS
  • CONTACT
Yellow Jacket Drilling Yellow Jacket Drilling
  • HOME
  • HEALTH & SAFETY
  • EQUIPMENT
    • QUOTE
  • LICENSES
  • CAREERS
  • CONTACT

EQUIPMENT

  • Down
    the
    Hole

To best suit our customers’ diverse drilling needs, Yellow Jacket utilizes a variety of different types of drill rigs. To complement whichever rig is used on your particular project, we provide all support vehicles, equipment, and tools necessary for successful completion of our work. All Yellow Jacket Drilling equipment is expertly maintained on both a routine maintenance and above-standard preventative maintenance schedule.

Ask us to get started on your environmental or water well drilling project in the following Western states:

Arizona • California • Colorado • Idaho • Montana • Nevada • New Mexico • Oregon • Texas • Utah • Washington • Wyoming

  • AIR/MUD/FLOODED ROTARY
  • DUAL ROTARY
  • SONIC
  • HOLLOW STEM AUGER
  • LIMITED ACCESS
  • TRACK MOUNTED
  • PUMP
  • UTILITY CLEARANCE

AIR/MUD/FLOODED ROTARY

SPEEDSTAR 50K

SPEEDSTAR 50KThe Speedstar 50K is capable of drilling a wide variety of projects, and has the ability of reaching 1500 feet bags. Since this rig can perform so many drill methods, we can accommodate any change in down-hole conditions while still satisfying your project needs.

PRIMARY DRILL METHODS
Air Rotary Casing Hammer
Direct Air Rotary
Stratex / Tubex
Down Hole Hammer
Direct Mud Rotary
Dual Tube Reverse Rotary
94mm / HQ Coring
Down Hole Sampling
TORQUE
8,600 ft./lbs. spindle torque
DIMENSIONS
Length 41 ft. 6 in.
Width 8 ft.
Height (mast down) 13 ft. 6 in.
Height (mast up) 43 ft. 7 in.

Spec Sheet

 

SPEEDSTAR 110K

Speedstar 100KThe Speedstar 110K is an extremely versatile drilling rig, and performs exceptionally well in deep environmental drilling and well installation applications. This rig has the capability of drilling depths up to 3000 feet bags.

PRIMARY DRILL METHODS
Air Rotary Casing Hammer
Direct Air Rotary
Stratex / Tubex
Down Hole Hammer
Direct Mud Rotary
Dual Tube Reverse Rotary
Large Diameter Reverse Rotary
94mm / PQ Coring
Down Hole Sampling
TORQUE
15,000 ft./lbs. spindle torque
DIMENSIONS
Length 59 ft.

Spec Sheet

DUAL ROTARY

DR24HD

Dual Rotary rigs are regularly used to drill and case through up to hundreds of feet of tough overburden where Air Rotary Casing Hammer (ARCH), Dual Wall Percussion Hammer (Becker), Under-reaming Systems (i.e. STRATEX, TUBEX.), and Sonic rigs have struggled or been unsuccessful; and when Mud Rotary is just not an option. The DR24HD also performs excellent in a variety of open-hole drilling applications, making it one of the most versatile, powerful, and truly unique machines in the drilling industry.

SPECS COMING SOON

SONIC

TSI 150T

Sonic TSi 150dThe TSi 150T manufactured by Terra Sonic International an industry leader in the design, and manufacturing of sonic drill rigs, tooling and support equipment is without question the MOST POWERFUL sonic drill rig available in the industry. Every component on this state of the art rig has been specifically designed to take the force that the powerful sonic oscillator can produce, and then some. No other sonic rig is going to get the job done safer, faster, or more efficiently than the TSi 150T can.

PRIMARY DRILL METHODS
Sonic
TORQUE
4,677 ft./lbs.
DIMENSIONS
Length 33 ft. 2 ½ in./folded – 37 ft./unfolded
Width 8 ft. 5 in./folded – 10 ft. 11 ¼ in./unfolded
Height (mast down) 12 ft. 9 ⅛ in.
Height (mast up) 26 ft. 6 in.

Spec Sheet

 

TSI 150CC

The TSi 150CC manufactured by Terra Sonic International an industry leader in the design, and manufacturing of sonic drill rigs, tooling and support equipment is without question the MOST POWERFUL sonic drill rig available in the industry. Every component on this state of the art rig has been specifically designed to take the force that the powerful sonic oscillator can produce, and then some. No other sonic rig is going to get the job done safer, faster, or more efficiently than the TSi 150T can.

PRIMARY DRILL METHODS
Sonic
TORQUE
4,677 ft./lbs.
DIMENSIONS
Length 33 ft. 2 ½ in./folded – 37 ft./unfolded
Width 8 ft. 5 in./folded – 10 ft. 11 ¼ in./unfolded
Height (mast down) 12 ft. 9 ⅛ in.
Height (mast up) 26 ft. 6 in.

HOLLOW STEM AUGER

CME 95

CME 95

SPECS COMING SOON

 

CME 85 / Boart Longyear BK 81

CME 85These truck mounted high torque drill rigs are designed for deep soil borings and installation of monitoring wells. They are capable of auger or rotary drilling methods.

HOLLOW STEM AUGER CAPABILITIES
Soil boring to 280 ft. below ground surface (bags)
2-inch and 3-inch wells to 280 ft. bags
4-inch wells to 220 ft. bags
6-inch wells to 160 ft. bags
8-inch wells to 150 ft. bags

AIR ROTARY (Tubex/Stratex) CAPABILITIES
Soil boring to 220 ft. bags
2-inch wells to 220 ft. bags
4-inch wells to 220 ft. bags

ROCK CORING CAPABILITIES
HQ / NQ Size
BK 81 Torque: 24,000 ft./lbs. spindle torque
CME 85 Torque: 20,000 ft./lbs. spindle torque

CME 85 DIMENSIONS
Length 31 ft. 6 in.
Height (mast down) 11 ft.
Height (mast up) 36 ft.
Width 8 ft.

BK 81 DIMENIONS
Length 31 ft. 6 in.
Height (mast down) 12 ft.
Height (mast up) 35 ft. 5 in.
Width 8 ft.

Spec Sheet

LIMITED ACCESS

L12T

This is a self-propelled drill rig that can work under 12.9 ft. clearance, but has the torque of a full size truck rig. This rig is capable of auger or rotary drilling methods.

HOLLOW STEM AUGER CAPABILITIES
Soil boring to 175 ft. bags
2-inch and 3-inch wells to 175 ft. bags
4-inch wells to 125 ft. bags
Torque: 12,000 ft./lbs. spindle torque
DIMENSIONS
Length (mast down) 14 ft. 2 in.
Length (mast up) 12 ft.
Height (mast down) 8 ft.
Height (mast up) min 12 ft. 9 in.
Height (mast up) max 16 ft. 2 in.
Width 6 ft.

Spec Sheet

TRACK MOUNTED

CME 850

CME 850The CME 850 allows access to locations inaccessible to any other type drill rig. The high flotation allows us to negotiate soft mud, sand, or deep snow. The walking beam suspension easily climbs over rocks and fallen logs. This rig has a very low center of gravity, which provides the stability needed in off-road conditions. Ground bearing pressure is only 2.5 psi. That’s less than the average man’s footstep!

PRIMARY DRILL METHODS
Dual Wall Air Rotary (Tubex / Stratex)
NQ Coring
Direct Air Rotary
Direct Mud Rotary
Hollow Stem Auger

HOLLOW STEM AUGER CAPABILITIES
Soil boring to 175 ft. bags
Angle Hole Capability
CME 140 Automatic Hammer

TORQUE
14,250 ft./lbs. spindle torque

DIMENSIONS
Length 23 ft.
Height (mast down) 7 ft. 9 in.
Height (mast up) 26 ft.
Width 8 ft. 3 in.

Spec Sheet

 

CME 1250

The CME 1250 is a one-of-a-kind rig, originally built for the military. It’s a larger version of the CME 850, and its ground bearing pressure is only 4 psi. If you need to drill large diameter auger holes, or deep rotary or core jobs in remote, harsh environments, you won’t find a rig better suited for the job than the CME 1250. In auger drilling applications, this rig can drill up to 18-inch diameter holes using hollow stem augers.

PRIMARY DRILL METHODS
Dual Wall Air Rotary (Tubex / Stratex)
NQ Coring
Direct Air Rotary
Direct Mud Rotary
Hollow Stem Auger

HOLLOW STEM AUGER CAPABILITIES
Soil boring to 350 ft. bags
Angle Hole Capability

TORQUE
31,000 ft./lbs. spindle torque

DIMENSIONS
Length 29 ft. 6 in.
Height (mast down) 9 ft. 2 in.
Height (mast up) 32 ft. 8 in.
Width 10 ft. 10 in.

Spec Sheet

PUMP

PULSTAR P100000

Pulsar 20000Pulstar P100000

SPECS COMING SOON

 

PULSTAR P12000

Pulsar 20000Pulstar P12000

SPECS COMING SOON

UTILITY CLEARANCE

VACMASTER 4000

VACMASTERThe Vacmaster 4000 is the workhorse of vacuum excavators, with the brute force to dig deep down with air, locating underground utilities in even the hardest soils without harming them. Now you can dig faster, easier, and safer in soil that is hard, wet, sun baked, or compact, including ground frost.

OPERATIONAL DATA
Vacuum 1000 cfm, 15 in. Hg, 4 in. hose
Compressor 300 cfm @ 220 psi (Air Lance) 300 cfm @ 100 psi (Air Tools)
High-Pressure Water 0–3000 psi @ 3 gpm
Low-Pressure Water 0–1000 psi for clean-up
DIMENSIONS
Length 27 ft. 4 in.
Height 10 ft. 10 in.
Width 8 ft.
GVW 25,950

Spec Sheet

Contact Us

We're currently offline. Send us an email and we'll get back to you, asap.

Send Message
Providing Environmental Drilling, Geotechnical Drilling, Water Wells and Pump Installation Services.

© 2019 · Yellow Jacket Drilling. All Rights Reserved. • Web site designed by Create Space LLC.